This coat comes with a 14 button front and a total of 24 buttons.

    A Deluxe Storage Box is available to keep your Epaulets in good condition when not in use. Deluxe Box is made of heavy paste board and covered with black leather and lined with white cotton. Due to limited quantities, we can only offer the storage boxes to customers of our Epaulets. (Imported)

U.S. (Union) Officer's Frock Coat for Senior Officers
w/Shoulder Boards	w/Epaulets & Sash

This REPRODUCTION Clothing item is Made in the USA. This a quality reproduction item made as close as is modernly possible. Sewing is done by machine to keep costs down (except where hand sewing is required) and most do not show externally. Some items offer hand sewing on exposed stitching (such as buttonholes) for an additional cost.     Pictures of the item on this page are pictures of the item we sold. All pictures of items we sell are Copyrighted, either by us or our supplier of the item.     This is not a costume that is made using modern construction or components that did not exist during the time of its original usage (IE: zippers, etc.). Beware of fakes, especially ones using images stolen from this site (Copyright Infringement). These items are Made in USA

    Shoulder Boards (pictured) are NOT included in base price.

    Material and Color Samples Page.
    Measurement Chart: Click Here.

    Branch of service colors are: Artillery - Red, Cavalry - Yellow, Berdan - Green, Chaplain - Black w/Cross, Engineer - Black w/Castle, Infantry - Medium Blue, Medical - Black w/MS, Paymaster - Black w/PD, Quartermaster - Black w/QM, Signal Corps - Black w/Crossed Flags, Topo Engineer - Black w/TE, Staff, including ALL Generals - Black.

    Chaplain, Engineer, Medical, Paymaster, Quartermaster, Signal Corps and Topo Engineer in ranks other than Captain and Major are a custom item and can take 4 to 12 weeks for delivery.

    Very Fancy Shoulder Boards: these included: Double Row Border, Triple Row Border, Four Row Border and Oak Leaf Border. These are wider than the standard shoulder boards, up to 2-1/4" wide. We only offer the triple row and oak leaf border ones. These are special order shoulder boards and can take 4 to 12 weeks for delivery.

Very Fancy Shoulder Boards - Special Order
Double Row Border	Triple Row Border	Four Row Border	Oak Leaf Border

     Shoulder Boards are NOT included with coats, but are available for an additional cost. You must add these item to the cart separately.

Captain of Staff, 24th Michigan

All three sizes Click for Larger Image

Medical Officer

    Junior Grade Officer epaulettes have 1/8" diameter fringe. The rank insignia on each epaulette is: 2nd Lieutenant - no rank insignia and 1st Lieutenant - 1 bar.

    Company Grade Officer epaulettes have 1/4" diameter fringe. The rank insignia on each epaulette is: Captain - 2 bars.

    Senior and General Officer epaulettes have 1/2" diameter fringe. The rank insignia on each epaulette is: Major - no rank insignia, Lieutenant Colonel - 1 silver oak leaf, Colonel - 1 Silver Eagle, Brigadier General 1 star (1.5"), Major General - 2 stars (1 - 1.5" & 1 - 1.25"), Major General Commanding/Lieutenant General 3 stars (1 - 1.5", 1 - 1.25" & 1 - 1.125" Note: We do not have the smallest star available, so you would need to use 2 - 1.25" stars.).

    Medical Officer epaulettes are identical to the Line Officer Epaulettes except they have the gold Wreath and silver M.S. letters in Old English embroidered in the crescent. Different diameters of fringe (and rank insignia) designated the various ranks of surgeon. Epaulettes as worn by Assistant Surgeon (Captain Rank- 1/4" fringe diameter). Two silver bars (per strap) need to be ordered to compete the rank structure. Junior Asst Surgeon (First Lieutenant) with 1/8" fringe diameter is also available (one pair of silver bars should be ordered). Regimental Surgeon (rank of Major) has the 1/2" diameter fringe but is without other rank insignia. Brigade Surgeon uses the same Epaulettes but order with the Silver Oak Leaf insignia. Medical Officer Epaulettes are custom order and take 8 to 10 weeks to deliver. Please allow sufficient time when ordering.

    Epaulettes are NOT included with coats, but are available for an additional cost. You must add this item to the cart separately.

    A Deluxe Storage Box is available to keep your Epaulets in good condition when not in use. Deluxe Box is made of heavy paste board and covered with black leather and lined with white cotton. Due to limited quantities, we can only offer the storage boxes to customers of our Epaulets. (Imported)

    Custom made item, please allow UP TO 10 - 14 weeks for delivery. Custom orders are not returnable.

M1858 Inf. Sgt.

    Mounted style has an extra layer of wool in the seat and inner leg area. Standard color is Sky Blue, however, M-1858 model dark blue and Berdan's Green is available on custom order.

    The M-1862 trousers were worn well into the Indian Wars. If you are purchasing them for Indian Wars NCO or Officer use, make sure to specify the appropriate M1872 Trouser stripe.

    For Army Officers: The 1858 Army Regulations called for officer's of all branches to wear Dark Blue trousers with the appropriate branch of service colored cord welt (piping) in the out seam. Generals and Staff Officer's trousers were to be plain without any piping. The 1862 Uniform Regulations changed the trouser color to Sky Blue for line officers (Artillery, Cavalry and Infantry) and continued the branch colored piping. Generals and their staff officers were to continue wearing Dark Blue trousers. However, 1861 Regulations now called for Staff Officer's trousers to have a 1/8" gold metallic piping. General's trousers continued to be plain without any piping.

    For USMC (United States Marine Corps) order the Sky Blue trousers with the USMC pocket and belted back options. For Privates, Corporals, Sergeants and First Sergeants order them without any piping/trouser stripe and for Officer's, Sgt Major, QM Sgt, Drum Major, Chief Musician and Musicians order them with the USMC piping.

    For Veterans Reserve Corps order the Sky Blue trousers with either back option and the Veterans Reserve Corps stripes.

    For Navy Officer's order the Dark Blue trousers with side seam pockets, belted back option and NO piping/trouser stripe.

U.S. Military Trousers, Foot and Mounted (QM-0701) Enlisted, NCO's and Officers
M1862 trousers front and back		M1858 Officer	M1862 Sergeant	Berdan Sharpshooter
optional back belt		USMC Sr NCO & Officer	USMC French Pocket & optional watch pocket

This REPRODUCTION Clothing item is Made in the USA. This a quality reproduction item made as close as is modernly possible. Sewing is done by machine to keep costs down (except where hand sewing is required) and most do not show externally. Some items offer hand sewing on exposed stitching (such as buttonholes) for an additional cost.     Pictures of the item on this page are pictures of the item we sold. All pictures of items we sell are Copyrighted, either by us or our supplier of the item.     This is not a costume that is made using modern construction or components that did not exist during the time of its original usage (IE: zippers, etc.). Beware of fakes, especially ones using images stolen from this site (Copyright Infringement). These items are Made in USA

    Material and Color Samples Page.
    Measurement Chart: Click Here.

    The Sash was wrapped twice around the waist and tied at the left hip. The pendant was to extend about 18" below the waist.

These sashs come in two lengths:
1. Standard Length: 30" to 40" Waist Size.
2. Long Length: 42" to 48" Waist Size. Long Length is available in Crimson, Yellow and Buff ONLY.

Tassel	Colors of sashes, by Branch
	A	US & CS General Officers (General's): Buff
	B	US & CS Line and Staff Officers and USMC Officers, except Commandant: Crimson/Wine
		US Dragoon Officers: Orange
	C	US & CS Medical Officers: Emerald
	D	CS Cavalry Officers: Yellow
	E	US NCO Red Wool Sash

Black, Officer's Plain Sabre Belt

Russet

CS Officer's Sabre Belt w/Brass Shoulder Strap Buckle and Decorative Stitching

US Officer's Sabre Belt w/Brass Shoulder Strap Buckle and Decorative Stitching

    Show as officer's plain version, with brass adjusting buckle on shoulder strap. The is also a fancy version with the brass adjusting buckle on shoulder strap and decorative stitching. Enlisted belts did not have a buckle on the shoulder strap.

This REPRODUCTION Leather item is Made in the USA. This a quality reproduction item made as close as is modernly possible. Sewing is done by machine to keep costs down (except where hand sewing is required). The leather is oiled, except for the White Buff Leather and the Enameled Leather, (usually Neatsfoot Oil) to protect it, but is usually soaked in by the time you receive it (we do not use Neatsfoot Oil Compound as it can damage stitching).     Our Russet Leather Oak Tanned Leather. It is not dyed, it is the natural color from the tanning process. Color will vary with lot. It will darken with age. If you want to speed up the process leave it outdoors in the sun on a hot day. Also the more you oil it the darker it will become. There is a very good article about 1800s russet by David Jarnigan and Ken Knopp at www.jarnaginco.com/fair%20leather.pdf.     Pictures of the item on this page are pictures of the item we sold. All pictures of items we sell are Copyrighted, either by us or our supplier of the item.     This is not a costume that is made using modern construction or components that did not exist during the time of its original usage (IE: chicago screws, etc.). Beware of fakes, especially ones using images stolen from this site (Copyright Infringement). These items are Made in USA

    NOTE: Belts should be ordered by WAIST SIZE, not the size over clothing. Belts are made longer (usually 4'') to adjust for going over the coat. If you will NOT be wearing this belt over a coat, then order your belt 2 inches smaller than your waist size.

    Overall length: 38", Blade: 32" by 1 1/8inches wide at the hilt. Weight: 3 lbs. 9 oz.

US M1850 Staff and Field Officers Sword Price: $225.00 Qty: Add 2 Cart:

    The collar is dark blue and has scarlet edge piping with two loops of 1/2" gold lace and features the open "V" at the throat. Sleeve "slash" is dark blue and piped in scarlet. Length of slash is sized according to the amount of gold lace squares used for the rank of the officer. Field Grade Officer's have four Squares, Captain's three, Lieutenant's two Squares. Back pockets are hidden in the folds of the skirt under pointed flaps with scarlet edge piping. A total of 6 large Marine buttons are on the back of the coat.

    The Marine Officer Full Dress Coat is to be worn with the Gold Epaulettes- same as the Army used, with the correct insignia for each rank. The Epaulettes may be ordered separately and either installed by yourself or us at extra charge. All Marine Officers except the Commandant wore the Crimson Sash. Our reproduction model 1854 US Marine buttons are supplied with this uniform. Either the sky blue wool trousers in winter, or the White Duck trousers in Summer would be worn with this coat.

    Shoulder Boards and Sash (pictured) are NOT included.

USMC Officer's Dress Frock Coat (Union) for all officer's except Commandant
	Chest & Neck Detail	Sleeve Detail

This REPRODUCTION Clothing item is Made in the USA. This a quality reproduction item made as close as is modernly possible. Sewing is done by machine to keep costs down (except where hand sewing is required) and most do not show externally. Some items offer hand sewing on exposed stitching (such as buttonholes) for an additional cost.     Pictures of the item on this page are pictures of the item we sold. All pictures of items we sell are Copyrighted, either by us or our supplier of the item.     This is not a costume that is made using modern construction or components that did not exist during the time of its original usage (IE: zippers, etc.). Beware of fakes, especially ones using images stolen from this site (Copyright Infringement). These items are Made in USA

    Material and Color Samples Page.
    Measurement Chart: Click Here.

    The Russian shoulder knot is worn with the undress frockcoat with the rank insignia attached to the knot. Price includes the Russian Knots and installation kit for you to install. Or we can affix the attaching hardware at extra cost. To see different Shoulder Knot styles available Click Here. The knots come without any rank insignia. However, you may purchase the silver metal rank insignia at most Police / Firefighter or Army PX stores.

    Our reproduction model 1854 US Marine buttons are supplied with this uniform.

This REPRODUCTION Clothing item is Made in the USA. This a quality reproduction item made as close as is modernly possible. Sewing is done by machine to keep costs down (except where hand sewing is required) and most do not show externally. Some items offer hand sewing on exposed stitching (such as buttonholes) for an additional cost.     Pictures of the item on this page are pictures of the item we sold. All pictures of items we sell are Copyrighted, either by us or our supplier of the item.     This is not a costume that is made using modern construction or components that did not exist during the time of its original usage (IE: zippers, etc.). Beware of fakes, especially ones using images stolen from this site (Copyright Infringement). These items are Made in USA

    Material and Color Samples Page.
    Measurement Chart: Click Here.